User`s guide

33
User’s Guide
Rev. 110212
Section 3: Adjusting the Volume
There are four different volume controls that can be adjusted with the Volume (+/-) Key
: the Handset, Headset, Speakerphone and Ringer volume.
To raise or lower the volume on the Handset, Headset, or Speakerphone, simply press the
Volume (+/-) Key up or down when the phone is in the process of dialing a call or during the
call itself.
The Ringer volume can be adjusted at any time when the phone is idle (when the handset is
hung up.)
To adjust the four different volume controls using the phone interface:
*
STEPS:
1) Press Menu
2) Use the Down Arrow to move to the Settings Option > Press OK
3) Click OK on Basic Settings
4) Use the Down Arrow to move to the Phone Volume Option > Press OK
5) Use the Up/Down Arrows to select one of the four volume controls (Handset, Speaker,
Headset or Ring) > Press OK
6) You may either use the Volume (+/-) Key or press the Right/Left Arrows to
increase/decrease the volume.
Section 4: Ring Tones
The phone’s Ring Tone can be customized to your preference by using the phone interface.
*
STEPS:
1) Press Menu
2) Use the Down Arrow to move to the Settings Option > Press OK
3) Click OK on Basic Settings
4) Use the Down Arrow to move to the Ring Tones Option > Press OK
A list of available Ring Tones (saved as .wav files) will display.
5) Use the Up/Down Arrows to select one of the Ring Tones > Press OK
The Ring Tone will play briefly on the phone so you can decide if it is the one you wish
to use. You may use the Volume (+/-) Key to increase/decrease the volume.
6) Save your desired Ring Tone by pressing either the Save Softkey (SIP 300 Series) or
the OK button.