Instructions / Assembly

5
I Product Introduction .....................................1
II List of Accessories........................................... 1
III Details of Accessories...................................... 1
IV Safety Instructions ..........................................2
V Inflation Operation............................................. 3-
4
VI Precautions
..................................................4
VII Troubleshooting ............................. ................5
Catalogue
ELECTRIC AIR PUMP
VIII Maintenance and Storage............................... 5
IX Warranty ......................................................... .
5
VII. Troubleshooting
VIII. Maintenance and Storage
IX. Warranty
Issue Inspection Solution
The pump
isn’t starting
Slow or
abnormal
inflation.
1. The power source is
not plugged in properly..
2. The fuse is burnt out.
3. Overheating or
overload causes the
motor stop.
1. Check whether the
hose is blocked or
cracked.
2. The joint between the
hose and air pump or
air bag is not installed
properly.
1. Make sure that the power
wire is plugged in the 12V
DC socket.
2. Change the fuse.
3. Cool the motor and
restart it.
4. If the problem cannot be
solved, please contact
the manufacturer or its
service agent or the similar
authorized personnel.
1. Change the hose & make
sure its not blocked or broken
2. Reinstall the hose.
3 .
If the problem cannot be
solved, please contact
the manufacturer or its
service agent or the similar
authorized person.
After use, unplug and store the pump. Make sure that the plug is
pulled out of the socket.
Allow to cool, then store.
Keep in a dry place, free of any water.
The Crew & Axel pump comes with a one year limited warranty. Please email us with any
questions in regards to product warranty at [e-mail].