Installation Instructions

10 11
32:(5
1&
32:(5
1&
(5
1&
1) Checking Remaining Battery
- With the power on, shortly press the POWER Button twice to display the
remaining battery indicator (LED).
- For Apple iOS version 5 or above, the remaining battery is displayed at
the top right side of the screen.
* The Battery Check feature will not operate while the battery is being charged.
* When the battery charge is under 3%, the alarm will sound.
If use is continued for several minutes the battery will be completely drained, the ‘Power Off’ voice guidance is
provided and the power will automatically turn off.
13. MISCELLANEOUS FEATURES
Remaining Battery Voice Guidance
Over 80% Battery is full
80% ~ 30% Battery is moderate
Under 30% Red light Battery is low
Under 3% Please recharge
2) Resetting the Device
- To reset to factory settings, at power off, press the POWER Button for over 10 seconds.
Operation LED Indicator
Factory Settings 5 times Purble light blinking
11. DISCONNECT NOTIFICATION
1) The 900 LEGACY vibrates when you are out of communication range
(about 10 m/33 ft.) from the ‘Bluetooth Device’.
2) The alarm function first notifies you with a vibration for 2 seconds and
beep sound, then beep sound is repeated 5 times in 20 second intervals.
3) If you continue to be out of range for more than 20 seconds, the 900
LEGACY will enter ‘Connection Waiting Mode’ after notifying you with
vibration and beep sounds, along with a voice prompt of ‘Device
Disconnected’.
4) If you move back into communication range before the notification
completes the fifth interval, you will stay connected to your ‘Bluetooth
Device’.
5) If you do not move back into communication range until after the
notification has ended, you will need to manually reconnect to Bluetooth.
Vibration rings for 2 seconds and beep
sound, then beep sound is repeated 5
times in 20 second intervals.
12. CONNECTING AND USING THE MICROPHONE CABLE
900 LEGACY can also be used with the audio cable connected as shown
in the figure.
* When connected to a device with the provided audio cable,
the Bluetooth remote features are disabled and you must use the device
you are connected Audio Cable to answer calls and play music.
X2
Audio Cable
32:(5
1&
32:(5
1&
32:(5
1&
32:(5
1&
32:(5
1&
(5
1&
900 LEGACY
Bluetooth
10:00100%
AVAILABLE DEVICES
Bluetooth devices have been found. If you
have any questions or problems while using
Bluetooth, contact us.
Your device is Currently visible to nearby
devices.
ON
SCAN
1m
Push 2 times
quickly
LED
Indicator