Specifications
Crestron V24R-C V-Panel™ 24” HD Touch Screen Displays
Operations Guide – DOC. 7327C V-Panel™ 24” HD Touch Screen Displays: V24R-C • 17
Setup
Configuring the V-Panel
To configure the V24R-C, use Crestron Toolbox™ to set up the V24R-C’s IP table
entry. Then assign the address of the device with which the V24R-C is
communicating (e.g., DGE-2) using device extenders that are programmed into
SIMPL Windows. For more information on device extenders, refer to the SIMPL
Windows help file.
Hardware Hookup
Ventilation
The V24R-C should be used in a well-ventilated area. To prevent overheating, do not
operate this product in an area that exceeds the environmental temperature range
listed in the table of specifications.
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made. When making
connections to the V24R-C, use Crestron power supplies for Crestron equipment.
Hardware Connections for the V24R-C
24VDC
3.7A
:
From DC
Power Pack
DM 8
G IN:
From DM Transmitter
or Switcher
USB HID
:
To Mouse
or Keyboard
Unused
NOTE: The V24R-C features a DM 8G+ type input. Connection to a DGE-2 or
DVPHD requires a DM 8G+ transmitter or DM switcher (all sold separately). For
wiring cable up to 330 feet (~101 meters) in length, use Crestron DM-CBL-8G
DigitalMedia 8G cable or third-party CAT5e (or better) UTP or STP. Shielded cable
and connectors are recommended to safeguard against unpredictable environmental
electrical noise, which may impact performance.
NOTE: It is normal for the V24R-C to feel warm during extended use.
NOTE: An Ethernet enabled control system is required for use with a DVPHD. Be
advised, DVPHD does not support streaming media, Web browser or other
embedded PC functionality.
Recommended Cleaning
Keep the surface of the touch screen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touch screen. Wipe touch screen clean and avoid getting moisture
beneath the bezel.