Specifications

Crestron V24R-C V-Panel™ 24” HD Touch Screen Displays
Operations Guide – DOC. 7327C V-Panel™ 24” HD Touch Screen Displays: V24R-C • 15
V24R-C Connectors (V24R-C Shown)
1
2
3
5
4
Connectors, Controls & Indicators
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 Hard Key (1) Programmable push button, illuminates
green to indicate power is on, also reboots
the DGE if held for five seconds
2 24VDC 3.7A (1) 2-pin 5 mm detachable terminal block,
24 Vdc power input
2
(power pack included)
3 DM 8G IN
Green
LED
Amber
LED
Pin 8
Pin 1
(1) 8-pin RJ-45 female, shielded DM 8G+
input
2, 3, 4, 5
Green LED indicates DM link status,
Solid amber LED indicates HDCP video,
Blinking amber LED indicates non-HDCP
video
4 USB HID (1) USB Type A female;
USB 1.1 host port for connection of a
mouse/keyboard or other HID (Human
Interface Device) compliant device
5 Unused This port is not used
1. An interface connector for the 24 VDC port is provided with the unit.
2. On V24R-C and V24RL-C models, connects to V24-IMCW-C interface module via included
V-CBL-SC cable.
3. On V24R-WALL-C model, connects to DM 8G+ output of a DM transmitter or switcher via CAT5e
or Crestron CM-CBL-8G.
4. The V24R-C features a DM 8G+ type input. Connection to a DGE-2 or DVPHD requires a DM 8G+
transmitter or DM switcher (all sold separately). For wiring cable up to 330 feet (~101 meters) in
length, use Crestron DM-CBL-8G DigitalMedia 8G cable or third-party CAT5e (or better) UTP or
STP. Shielded cable and connectors are recommended to safeguard against unpredictable
environmental electrical noise, which may impact performance. Refer to the latest version of the
Crestron DigitalMedia Design Guide (Doc. 4546) for DM system design guidelines. The V24R-C and
V24RL-C models each include (1) V-CBL-SC6 six foot (~1.8 meter) V-Cable and (1) V24-IMCW-C
interface module. The V24R-WALL-C model includes no cable or interface module. For complete
information, please refer to the spec sheet for each individual product or contact your Crestron
representative.