Installation guide

Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C
Hardware Connections for the V24-IMCW-C (Front)
TO PANEL – DM:
To V24R-C
Touch Screen
TO PANEL – G, 24:
To V24R-C
Touch Screen
PWR IN – 24VDC 3.7A:
From DC Power Pack
* A ferrule dust cap (2031467) is provided to cover the front panel DC power jack
when not in use.
Hardware Connections for the V24-IMCW-C (Rear)
DM:
From DM Transmitter
or Switcher
PWR IN – 24VDC 3.7A:
From DC Power Pack
PWR IN – 24, G:
From DC Power Pack
CAUTION: The V24-IMCW-C can be powered via the 24 G 2-pin
connection on the rear of the unit or the 24VDC 3.7A jacks on either the
front or the rear of the unit. To avoid possible damage to the unit, use
only one of these connectors.
NOTE: Ensure the unit is properly grounded by connecting the chassis
ground lug to an earth ground (building steel).
12 • Interface Module: V24-IMCW-C Installation Guide – DOC. 7175C