Installation guide

Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C
Connectors, Controls, & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
5 DM
(1) 8-pin RJ-45 female, shielded;
DM 8G+ input;
Connects to DM 8G+ output of a
DM
®
transmitter or switcher via
CAT5e or Crestron DM-CBL-8G
cable
2, 3
PIN COLOR
1 White/Orange
2 Orange
3 White/Green
4 Blue
5 White/Blue
6 Green
7 White/Brown
8 Brown
6 PWR IN
24, G
G
24
(1) 2-pin 5 mm detachable terminal
block;
24 Volt DC power input from power
pack
2
7 PWR IN
24VDC 3.7A
(1) 2.1 x 5.5 mm DC power
connector;
24 Volt DC power input from power
pack
2
8 Ground (1) Flying lead, ground wire
1. An interface connector for the PWR IN 24, G port is provided with the unit.
2. Item(s) sold separately or included with touch screen display.
3. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G cable or
generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is
330 feet (100 meters) between devices. Shielded cable and connectors are
recommended to safeguard against unpredictable environmental electrical noise,
which may impact performance at resolutions above 1080p. All wire and cables
sold separately. Refer to the DigitalMedia Design Guide (Doc. 4546) for complete
system design guidelines.
6 • Interface Module: V24-IMCW-C Installation Guide – DOC. 7175C