Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Installation Guide
This document was prepared and written by the Technical Documentation department at: Regulatory Compliance As of the date of manufacture, the V24-IMCW-C has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Contents Interface Module for V24R-C and V24RL-C: V24-IMCW-C 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 2 Specifications .........................................................................................................
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Interface Module for V24R-C and V24RL-C: V24-IMCW-C Introduction The V24-IMCW-C is an interface module designed for use with a V24R-C or V24RL-C V-Panel™ 24” HD Touch Screen Display. It affords a convenient, pluggable connection for the touch screen, providing front panel jacks for DigitalMedia 8G+™ (DM 8G+™) and power. On the rear is a DM 8G+ pass-through jack for connection to a DM 8G+ transmitter or switcher1.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C Features and Functions • Provides a wall plate connection for a V-Panel 24” HD Touch Screen Display • Mounts in a single-gang electrical box or mud ring • Includes inserts to match black, white or almond faceplates • Includes surface mount and rack rail installation options • Provides pass-through connections for 24VDC power and DigitalMedia 8G+ Specifications Specifications for the V24-IMCW-C are listed in the following table.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C V24-IMCW-C Specifications (Continued) SPECIFICATION Dimensions Height Width Depth Weight DETAILS 4.12 in (105 mm) 1.72 in (44 mm) 1.93 in (49 mm) with surface mount bracket 1.58 in (40 mm) 5 oz (141 g) with bracket Physical Description This section provides information on the connections, controls and indicators available on the V24-IMCW-C. V24-IMCW-C Physical View (Front and Rear) Installation Guide – DOC.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C V24-IMCW-C Overall Dimensions 1.72 in (44 mm) 1.60 in (41 mm) 1 4.12 in (105 mm) 5 2 6 3 7 2.67 in (68 mm) 4 0.10 in (3 mm) 0.06 in (2 mm) 1.04 in (27 mm) 1.45 in (37 mm) 1.38 in (35 mm) 1.58 in (40 mm) 4 • Interface Module: V24-IMCW-C 8 6.00 in (153 mm) Installation Guide – DOC.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 1 TO PANEL DM (1) 8-pin RJ-45 female, shielded; Connects to a V24R-C touch screen via a V-CBL-SC cable2 2 TO PANEL G, 24 G 24 PIN COLOR 1 2 3 4 5 6 7 8 White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown (1) 2-pin 5 mm detachable terminal block; Connects to a V24R-C touch screen via a V-CBL-SC cable2 3 PWR IN 24VDC 3.7A (1) 2.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C Connectors, Controls, & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS 5 DM 6 DESCRIPTION (1) 8-pin RJ-45 female, shielded; DM 8G+ input; Connects to DM 8G+ output of a DM® transmitter or switcher via CAT5e or Crestron DM-CBL-8G cable2, 3 PWR IN 24, G 24 G 7 PWR IN 24VDC 3.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Setup Network Wiring When wiring the DM® network, consider the following: • Use Crestron® Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. • For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G™ cable or generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C Supplied Hardware The hardware supplied with the V24-IMCW-C is listed in the following table.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Installation The V24-IMCW-C can be installed in either a 1-gang box, rack mounted or mounted to any flat surface using the provided surface mount bracket. Installing in 1-Gang Box To install the V24-IMCW-C in a 1-gang box, ensure the unit is mounted into the electrical box as shown in the following illustration.
Interface Module for V24R-C and V24RL-C Rack Mounting Crestron V24-IMCW-C The V24-IMCW-C can be mounted in a rack with other equipment using two of the four mounting holes on the corners of the interface module, as shown in the following illustration.
Crestron V24-IMCW-C Installing on a Level Surface Interface Module for V24R-C and V24RL-C To prepare the V24-IMCW-C to be mounted onto a level surface, ensure the unit is attached to the surface mount bracket, as shown in the following illustration.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C Hardware Connections for the V24-IMCW-C (Front) TO PANEL – DM: To V24R-C Touch Screen TO PANEL – G, 24: To V24R-C Touch Screen PWR IN – 24VDC 3.7A: From DC Power Pack * A ferrule dust cap (2031467) is provided to cover the front panel DC power jack when not in use. Hardware Connections for the V24-IMCW-C (Rear) DM: From DM Transmitter or Switcher PWR IN – 24, G: From DC Power Pack PWR IN – 24VDC 3.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. V24-IMCW-C Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Device does not function. Device is not receiving sufficient power. PWR LED does not illuminate. Device is not receiving sufficient power.
Interface Module for V24R-C and V24RL-C Crestron V24-IMCW-C Further Inquiries To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at 1-888-CRESTRON [1-888-273-7876] or refer to the listing of Crestron worldwide offices on the Crestron Web site (www.crestron.com/offices) for assistance within a particular geographic region. To post a question about Crestron products, log onto the Online Help section of the Crestron Web site (www.crestron.
Crestron V24-IMCW-C Interface Module for V24R-C and V24RL-C Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 7175C (2030554) 09.12 Specifications subject to change without notice.
