Specifications

Crestron V24-C V-Panel™ 24” HD Touch Screen Displays
Setup
Configuring the V-Panel
The V-Panel is configured from the setup menu using the DGE Digital Graphics
Engine (sold separately). Refer to the Operations Guide that came with your DGE.
Hardware Hookup
Ventilation
The V24-C should be used in a well-ventilated area.
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications.
Connect the Device
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the V24-C, use Crestron power supplies for Crestron
equipment.
Hardware Connections for the V24-C (V24-C Shown)
24VDC 3.7A:
From DC
Power Pack
DM 8G IN:
From DM Transmitter
or Switcher
USB HID:
To Mouse
or Keyboard
PEN:
From (Optional)
Annotation Pen
PEN SWITCH:
From (Optional)
Annotation Pen Holder
NOTE: The V24-C features a DM 8G+™ type input. Connection to a DGE-2 or
DVPHD requires a DM-TX-201-C transmitter (sold separately). For wiring cable up
to 330 feet (100 meters) in length, use Crestron DM-CBL-8G DigitalMedia 8G cable
or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are
recommended to safeguard against unpredictable environmental electrical noise,
which may impact performance. Cable sold separately. Refer to the latest version of
the Crestron DigitalMedia Infrastructure Guide (Doc. 4556) for complete wiring
guidelines.
NOTE: An Ethernet enabled control system is required for use with a DVPHD. Be
advised, DVPHD does not support streaming media, Web browser or other
embedded PC functionality
Recommended Cleaning
Keep the surface of the touch screen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touch screen. Wipe touch screen clean and avoid getting moisture
beneath the bezel.
Operations Guide – DOC. 6914A V-Panel™ 24” HD Touch Screen Displays: V24-C • 17