Specifications

V-Panel™ 24” HD Touch Screen Displays Crestron V24-C
Specifications
Specifications for the V24-C are listed in the following table.
V24-C Specifications
SPECIFICATION DETAILS
Touch Screen Display
Display Type TFT Active Matrix Color LCD
Size 24 inch (610 mm) diagonal
Aspect Ratio 16:10 WUXGA
Resolution 1920 x 1200 pixels
Brightness 300 nits
Contrast 1000:1
Response Time 6 ms G-to-G
Color Depth 24-bit, 16.7 million colors
Illumination Backlit fluorescent
Viewing Angle ±89º horizontal, ±89º vertical
Touchscreen Capacitive
Video
Refer to DGE-2 or DVPHD specifications for
additional information. They are available in the
latest version of the DGE-2 Digital Graphics
Engine Operations Guide (Doc. 6809) and the
DVPHD High Definition Digital Video Processor
Operations Guide (Doc. 6545), respectively.
Input Signal Type
DM 8G+ (DigitalMedia over one CAT5e twisted
pair copper)
Input Resolutions
1920 x 1200 @ 60 Hz native or any other
progressive resolution up to
1920 x 1200 @ 60 Hz
Communications
DigitalMedia DM 8G+, HDCP, EDID, 100 Mbps Ethernet
USB
Supports USB HID (Human Interface Device)
class devices
Power Requirements
Power Pack
3.7 Amps @ 24 Volts DC 100-240 Volt AC,
50/60 Hz power pack included
Environmental
Temperature 41º to 113º F (5º to 45º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 291 BTU/Hr
Enclosure
V24-C Plastic case, VESA 100 x 200 mm mountable
V24-WALL-C
Includes metal rear enclosure with plastic front
bezel, additional mounting accessory required
1, 2
V24L-C
Includes metal rear enclosure with plastic front
bezel, fan cooled, additional mounting
accessory recommended
1, 2
(Continued on following page)
6 • V-Panel™ 24” HD Touch Screen Displays: V24-C Operations Guide – DOC. 6914A