Specifications

V-Panel™ 12” and 15” HD Touch Screen Displays Crestron V12 & V15
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 Hard Key
(1) Programmable push button, also reboots
DGE if held for five seconds
2 DM Link LED
(1) Green LED, indicates power and
connection to DGE or other DM device
3
24 A B G
2, 3
24
GAB
(1) 4-pin 3.5 mm detachable terminal block,
DMNet port;
Connects to DMNet port of a DGE, DGE-2,
DM transmitter or DM switcher (all sold
separately) via DB-CBL cable
4, 5
4
DM INPUT
D & M
6, 7
M
D
(1) DM CAT input comprised of (2) 8-pin
RJ-45 female, shielded;
Connects to DM CAT output of a DGE-1,
DGE-2, DM transmitter or DM switcher (all
sold separately) via DB-CBL cable
4, 5
5
USB
(1) USB Type A female;
USB 1.1 host port for connection of a
mouse/keyboard or other HID (Human
Interface Device) compliant device
1. Interface connectors for 24 A B G and DM INPUT ports are provided with the unit.
2. Refer to the following table for the 24 A B G connector pinouts.
24 A B G Port
24
GAB
PIN # SIGNAL DESCRIPTION WIRE COLOR
24 24V DC DC Power Red
A DMNet+ DMNet White
B DMNet- DMNet Blue
G Ground DC Ground Black
3. DMNet wiring is not compatible with Cresnet
®
wiring. DMNet wiring cannot be daisy chained.
4. The V12/15 features a DM CAT input. For direct connection to a DGE-1, use DM-CBL DigitalMedia
cable up to 200 feet (61 meters) in length. For connection to a DGE-2, direct or via a DigitalMedia
switcher, use DM-CBL DigitalMedia cable up to 450 feet (137 meters) in length. For connection to a
DVPHD, via a DigitalMedia transmitter or switcher, use DM-CBL DigitalMedia cable up to 450 feet
(137 meters) in length. Up to two DM Repeaters (model DM-DR, sold separately) are required for
cable lengths beyond 200 feet (61 meters). Refer to the latest version of the Crestron DigitalMedia
Design Guide (Doc. 4789) for complete wiring guidelines. The V12 and V15 include (1) V-CBL-T3
three foot (~0.9 meter) V-Cable and V-IMCW wall mount interface module and the V12-TILT and
V15-TILT models include (1) V-CBL-T6 6 foot (~1.8 meter) V-Cable and V-IMCW wall mount
interface module. The V12-WALL and V15-WALL models include no cable or interface module.
5. An Ethernet enabled control system is required for use with a DVPHD. Be advised, the DVPHD does
not support audio, intercom, streaming media, Web browsing or other embedded PC functionality.
6. To determine which is pin 1 on the cable, hold the cable so the end of the eight pin modular plug is
facing away from you, with the clip down and copper side up. Pin 1 is on the far left.
24 • V-Panel™ 12” and 15” HD Touch Screen Displays: V12 & V15 Operations Guide – DOC. 6806D