Specifications

Crestron TPMC-V12/15 V-Panel Integrated 12” & 15” HD Touch Screens
CAUTION: Do not apply excessive pressure to the touch screen display during
handling. Doing so can crack the screen and damage the touch screen.
NOTE: Direct connection of the TPMC-V12/15 to a Cresnet power source and
Ethernet LAN, without the use of the TPMC-V-IMCW, negates video connectivity.
NOTE: For wiring between the TPMC-V12 and interface module, use a
TPMC-V-CBL-S Siamese Cable, CresCAT
®
, CresCAT-D-HP, CresCAT-QM,
DM-CBL or quality CAT5e/CAT6. CAT5e/6 requires an additional CRESNET or
CRESNET-HP for Cresnet and power or else a single wire pair for power only. The
maximum length for CRESCAT-D-HP, CAT5e/6 + CRESNET-HP or CAT5e/6 + 14
AWG power wire is 330 feet (100 meters) minus the length of any Ethernet cable
connected to the LAN jack on the rear of the interface module. The maximum length
for CresCAT, CresCAT-QM, DM-CBL, CAT5e/6 + CRESNET or CAT5e/6 + 18
AWG power wire is 166 feet (50 meters) minus the length of any additional Ethernet
cable beyond 164 feet (50 meters).
NOTE: For wiring between the TPMC-V15 and interface module, use a
TPMC-V-CBL-S Siamese Cable, CresCAT, CresCAT-D-HP, CresCAT-QM,
DM-CBL or quality CAT5e/CAT6. CAT5e/6 requires an additional CRESNET or
CRESNET-HP for Cresnet and power or else a single wire pair for power only. The
maximum length for CRESCAT-D-HP, CAT5e/6 + CRESNET-HP or CAT5e/6 + 14
AWG power wire is 330 feet (100 meters) minus the length of any Ethernet cable
connected to the LAN jack on the rear of the interface module. The maximum length
for CresCAT, CresCAT-QM, DM-CBL, CAT5e/6 + CRESNET or CAT5e/6 + 18
AWG power wire is 190 feet (58 meters) minus the length of any additional Ethernet
cable beyond 140 feet (42 meters).
NOTE: Be sure to set Cresnet to Disable when using Ethernet. Refer to “Cresnet”
on page 32 for details.
NOTE: When booting the TPMC-V12/15, the only USB devices supported are a
keyboard or mouse. Having a USB drive or hub connected interferes with proper
booting of the touch screen.
NOTE: After inserting a USB device or MMC card, a “Found New Hardware”
window may appear. If this window appears, click “Yes” to close the window.
Operations Guide – DOC. 6940G V-Panel Integrated 12” & 15” HD Touch Screens: TPMC-V12 & TPMC-V15 • 49