Specifications

Crestron TPMC-V12/15 V-Panel Integrated 12” & 15” HD Touch Screens
ETHERNET Details
The Ethernet portion of the setup menu allows configuration of the touch screen
settings for Ethernet communications.
The Crestron Swirl logo
at the top of the Ethernet portion of the setup menu
illuminates to indicate the status of the connection to the control system(s):
Green - Connected
Yellow - Network trouble
Orange - Connected to some but not all of the control systems (listed in IP
table)
Red - Not connected to any control system (listed in the IP table)
NOTE: After configuring Ethernet settings (e.g., changing IP address, etc.), wait at
least five seconds after seeing the change in the Ethernet Status section of the main
setup menu before initiating a Save & Reboot to save the new settings.
Adapters
Touch the Adapters button to access the “Ethernet Setup” window, shown in the
illustration below. Changes are made in real time and there is typically no need to
reboot. The Ethernet address and mask are displayed on this screen.
“Ethernet Setup” Window
To configure the Ethernet adapter, touch its name once to select it in the Adapter
Name list. Then, touch Configure to open the “Local Area Connection Properties”
window. This window displays the connection and related required items.
Operations Guide – DOC. 6940G V-Panel Integrated 12” & 15” HD Touch Screens: TPMC-V12 & TPMC-V15 • 41