Specifications

Crestron TPMC-V12/15 V-Panel Integrated 12” & 15” HD Touch Screens
Update Panel
The Update Panel button permits the selection of the touch screen program, a .vtz
file. It is also used to upgrade firmware.
The Project tab of the “Project and Firmware” window is divided into two sections:
Current Loaded Project and Load New Project.
Current Loaded Project displays the name and creation time of the current project.
In the Load New Project section, touch Browse and select the compiled project (i.e.,
the .vtz file) to be loaded from a network drive, USB device or flash drive, then
touch Open to show the source file in the “Project and Firmware” window. Touch
Load to uncompress the project file, place it in the destination selected in Target
Location to Load the Project to and display it on the touch screen.
In the Target Location to Load the Project to area of the Load New Project section,
the location where uncompressed project files are to be stored can be chosen. The
default file location is the internal flash.
NOTE: If there is a mapped network drive on the touch screen, the first time
Browse is selected, it may take some time for the “Open” window to appear.
NOTE: When selecting Browse, the contents of the “Recent” folder are not
available.
NOTE: Projects can also be loaded via Crestron Toolbox.
NOTE: If External is checked, the display list cannot be viewed via Crestron
Toolbox.
NOTE: When loading a project to an external storage device (e.g., MMC card or
flash drive), a subdirectory (not the root) must be used as the working path.
Otherwise, the upload may fail.
“Project and Firmware” Window (Project Tab)
The Firmware tab of the “Project and Firmware” window (refer to illustration that
follows) displays the Current Loaded Firmware and also has a Load New Firmware
section.
Operations Guide – DOC. 6940G V-Panel Integrated 12” & 15” HD Touch Screens: TPMC-V12 & TPMC-V15 • 35