Specifications

Crestron TPMC-V12/15 V-Panel Integrated 12” & 15” HD Touch Screens
Touch Screen
The Touch Screen button opens the “Touch Screen Settings” window, which
provides access to touch screen calibration when Calibrate Touch Screen… is
touched.
“Touch Screen Settings” Window
To view the mouse cursor on the touch screen, select On in the Mouse Cursor
section of the window. The mouse cursor is displayed only if a mouse is connected
to the touch screen.
When Calibrate Touch Screen… is touched, the calibration screen opens. Touch
the screen to begin the calibration process. If the screen is not touched within 60
seconds, the calibration sequence stops and the screen returns to the “Touch Screen
Settings” window.
If the screen is touched before the 60 second timeout, the screen instructs the user to
touch the center of each target as it appears. A series of crosshairs appears on the
screen, starting near the upper left corner. Touch the center of the first crosshair to
initiate calibration. As each new crosshair is touched, the next appears. After the
upper left, crosshairs appear in the upper center, upper right, middle left, screen
center, middle right, lower left, lower center and finally lower right. Touch the center
of the crosshair in the lower right of the screen to conclude calibration and return to
the “Touch Screen Settings” window. Touch OK to accept the changes and return to
the setup menu.
NOTE: When touching the screen during calibration, be as accurate as possible.
Use the tip of a capped pen or the eraser end of a pencil. To cancel calibration and
return to the “Touch Screen Settings” window without saving calibration data, create
a calibration error by touching the screen in the same spot for each calibration point.
NOTE: The touch screen’s calibration routine can also be accessed through Crestron
Toolbox if the touch screen is connected to a control system via Cresnet or TCP/IP
by selecting the device from the Network Device Tree and right-clicking the device
to select Functions > Setup Mode…. Select Enter Calibration Mode to begin
calibration.
Operations Guide – DOC. 6940G V-Panel Integrated 12” & 15” HD Touch Screens: TPMC-V12 & TPMC-V15 • 33