Specifications

Universal Presentation Processor Crestron UPX-2
4. The “Upx Debug Output” window appears and permits access to the
SETUP MENU by clicking Project | Enter Setup Mode.
“Upx Debug Output” Window
SETUP MENU Screen
NOTE: If the SETUP MENU is not displayed in the center of the screen,
refer to the note on page 26 for instructions on adjusting the display.
5. The Touch Screen button permits you to select how to use the AUX COM
serial port via the “Touch Screen/Console Settings” window. You must
select Console to establish communications and upload programming via
the serial connection. In the Console Settings box, select the Baud Rate
(115200), select Parity (None), select Data Bits (Eight), select Stop Bits
(One), and enable RTS/CTS.
Operations Guide – DOC. 6276B Universal Presentation Processor: UPX-2 ¥ 61