Specifications

Universal Presentation Processor Crestron UPX-2
“Configure Device” Window
Enter a name for the new device (or edit the existing device name) and select a
supported device-type from the Type drop-down list. If applicable, the Port field will
indicate which of the UPX-2’s serial ports should be connected to the device. USB
devices can be enabled or disabled by checking or unchecking the Enable box.
NOTE: The Name which is entered for the device is for the end-user’s convenience
and is displayed only during calibration.
Display Output
The Display Output button permits you to select the output resolution and provides
test charts for setting up the display device. Output A and B have the same
resolution.
“Display Output” Window
Select the appropriate Output Resolution, and click Apply. If the screen resolution is
not acceptable, choose another resolution setting. If the controls are no longer visible
due to the changed resolution setting, use Crestron Toolbox to change the resolution.
Operations Guide – DOC. 6276B Universal Presentation Processor: UPX-2 ¥ 33