Specifications

Crestron UPX-2 Universal Presentation Processor
NOTE: The UPX-2 is only compatible with 2-Series control systems.
COM
Pin 1
Pin
9
COM
DB9 male connector provides hardware and software handshaking bidirectional
support for RS-232, RS-422, and RS-485. This connector can be used for the touch
out command (Touch the PC application) as well as local serial device control.
COM Connector Pinout
PIN DIRECTION DESCRIPTION
1 To UPX-2 (RXD-) RS-422 Receive Data (Idles Low)
2 To UPX-2 (RXD) RS-232 Receive Data
3 From UPX-2 (TXD) RS-232 Transmit Data
4 From UPX-2 (TXD+) RS-422 Transmit Data (Idles High)
5 GND RS-232 and RS-422 Signal Common
6 To UPX-2 (RXD+) RS-422 Receive Data (Idles High)
7 From UPX-2 (RTS) RS-232 Request to Send
8 To UPX-2 (CTS) RS-232 Clear to Send
9 From UPX-2 (TXD-) RS-422 Transmit Data (Idles Low)
RGB OUTPUT A and B
RGB OUTPUT
A
B
Pin 5
Pin 10
Pin 15
Pin 1
Pin 6
Pin 11
Two DB15HD female connectors are provided for RGB (VGA) output. The DTT
(DualTouch Technology touchpanel) is connected to RGB OUTPUT A for analog
video. The display device is connected to RGB OUTPUT B.
Out
p
ut DB15HD Pinou
t
PIN DESCRIPTION PIN DESCRIPTION
1 Red video output 9 Not Connected
2 Green video output 10 GND
3 Blue video output 11 Not Connected
4 Not Connected 12 Not Connected
5 GND 13 Horizontal or Composite Sync
6 GND 14 Vertical Sync
7 GND 15 Not Connected
8 GND
12 ¥ Universal Presentation Processor: UPX-2 Operations Guide – DOC. 6276B