Specifications

Universal Presentation Processor Crestron UPX-2
The Functions menu may now be used to upload a project, update
firmware, and reset the network ID.
Crestron Toolbox Functions Menu
Ethernet Communications
For complete instructions for establishing Ethernet communications, refer to
“Establishing Communications Between the PC and the UPX-2” on page 59.
1. To establish Ethernet communications, select Identity from the UPX-2
SETUP MENU.
“Network ID” Window
2. Copy the Hostname from the “Network ID” window.
3. Start Crestron Toolbox and open the address book by clicking
.
4. Select the existing UPX2 entry from the Address Book (for changing to a
TCP/IP entry) or click Add Entry and type a name for the new device
(UPX2-tcp-ip in our example).
Operations Guide – DOC. 6276B Universal Presentation Processor: UPX-2 ¥ xi