Specifications

Crestron Isys
®
TPS-4000 10.4 Inch Tilt Touchpanel
Specifications
The following provides a summary of specifications for the TPS-4000 touchpanel.
Specifications for the TPS-4000 Touchpanel
SPECIFICATION DETAILS
Power Requirements 22 Watts (0.92 Amp @ 24 VDC)
Default Network ID 03
Timeout
Adjustable from 0 to 120 minutes (Default = 15
min.)
Signal Join Maximums 4000 Digital, 4000 Analog, 999 Serial
Control System Update
Files
1,2,3
2-Series Control System Version C2.V2004.CUZ or later
2,4
CEN/CN-TVAV Version 51130V.UPZ or later
3,4
CNMSX-AV/PRO Version 51125X.UPZ or later
3,4
CNRACKX/-DP Version 51125W.UPZ or later
3,4
CNMS, CNRACK,
CNLCOMP
Version 3.18.09m, l, c or later or later
3
ST-CP Version 4.02.4S.UPZ or later
Audio
• Balanced (20 kΩ) & unbalanced (10 kΩ) line
level stereo input through 6-position mini-
terminal block connector
• Maximum input level 2 Vrms single ended,
4 Vrms differential with internal volume
control and two speakers
• Balanced line level microphone with AGC
output via 3-position mini- terminal block
connector
• Microphone Output Impedance: 600 Ohm
balanced / 300 Ohm Unbalanced
• Maximum Microphone Output: 1 Vrms single
ended, 2 Vrms differential
• Built-in WAV file (8bit 8kHz mono PCM type)
& key click capability
5
• Speaker amplification: 2 Watts per channel
• Stereo headphone mini-phone jack on rear
of unit
Video
• Direct Composite/S-video input through
TPS-IMPC/IMW, Balanced 100 Ω,
Unbalanced 75 Ω
• Built-in time base correction for stable video
• Video can be displayed full screen or in a
window
• NTSC and PAL supported
(continued on next page)
Operations Guide - DOC. 6268 10.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-4000 • 3