Crestron Isys® TPS-4000 10.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Contents 10.4 Inch Tilt Touchpanel: Crestron Isys® TPS-4000 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 10.4 Inch Tilt Touchpanel: Crestron Isys® TPS-4000 Introduction Features and Functions The TPS-4000 packs all the power and performance of a Crestron Isys® panel in a compact, stylish tilt model. Its compact stature makes the TPS-4000 perfect for the home, especially in locations like home theaters, bedrooms and the home office. Featuring a 10.4-inch (26.
10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Multiple graphics can be displayed on the TPS-4000 without any shift in color depth or quality. The TPS-4000 can display real-time video from any Crestron balanced video distribution product or any balanced video, S-video or composite video source.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Specifications The following provides a summary of specifications for the TPS-4000 touchpanel. Specifications for the TPS-4000 Touchpanel SPECIFICATION DETAILS Power Requirements 22 Watts (0.92 Amp @ 24 VDC) Default Network ID 03 Timeout Adjustable from 0 to 120 minutes (Default = 15 min.) Signal Join Maximums 4000 Digital, 4000 Analog, 999 Serial Control System Update Files1,2,3 2-Series Control System Version C2.V2004.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Specifications for the TPS-4000 Touchpanel (continued) SPECIFICATION Video (continued) DETAILS • Supports still and full-motion video • Brightness, contrast, hue and saturation adjustments Touchpanel Firmware TPS.V.2.060.0.csf or later Memory 8MB internal flash memory, 8MB of DRAM Screen Dimensions 10.4"/26.4 cm diagonal Screen Viewing Angles: Y Dir. (X=0o): +45o (from top), -55o (from bottom) X Dir.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Physical Description The TPS-4000’s 10.4-inch (26.42 cm) touch sensitive viewing screen is located on the front of the TPS-4000 touchpanel. The electronic hardware is housed in a high impact, black molded plastic enclosure with silver accent as shown in the following diagram. This touchpanel is designed for placement on a tabletop or other flat surface. It has a hinged base, which can tilt from 30 to 80 degrees.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Physical Views of the TPS-4000 Touchpanel (Top and Bottom) 3.90 in (9.91 cm) 0.75 in (1.91 cm) 5.40 in 7.21 in (13.72 cm) (18.31 cm) 4.10 in (10.41 cm) Physical Views of the TPS-4000 Touchpanel (Side with Min. and Max. Angle) 9.32 in (23.67 cm) 8.57 in (21.77 cm) 10.03 in (25.48 cm) TILT ANGLE 30 TO 80 DEGREES 6.86 in (17.41 cm) 1.40 in 1.20 in (3.04 cm) (3.55 cm) Sound The TPS-4000 has built-in speakers with power amplifiers.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Interface Modules Connect the TPS-4000 to an outboard interface module, which provides expanded network, video, and audio connections for the touchpanel system. A 15-foot connecting cable assembly is supplied. Cable assemblies of other lengths are available and can be purchased from Crestron. There are two interface modules available: TPS-IMPC and TPS-IMW. The TPS-IMPC is supplied with every TPS-4000.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel (2) this device must accept any interference received, including interference that may cause undesired operation. Setup Network Wiring CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could cause equipment damage or void the Crestron warranty. CAUTION: Provide sufficient power to the system. Insufficient power can lead to unpredictable results or damage to the equipment.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel NOTE: All network wiring must consist of two twisted pairs. One twisted pair is the +24V conductor and the GND conductor. The other twisted pair is the Y and Z conductors. NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to avoid nicking the conductors. Twist together the ends of the wires that share a pin on the network connector, and tin the twisted connection. Apply solder only to the ends of the twisted wires.
10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Calibration Menu CALIBRATION MENU Calibration of the touchscreen is required if the active touch area of a button does not coincide with the button's image. Select the Touch Screen Calibration button to display the CALIBRATION MENU, shown to the left. The CALIBRATION MENU offers the choice to initiate calibration with the Perform Calibration button or return to the previous screen with the Return button. Choose an option by touching the correct button.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel transferred. The Net ID for the TPS-4000 is factory set to 03. No two devices in the same system can have the same Net ID Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and decrease the CRESNET ID by one, respectively. Select the Return button located on the INTERFACE MENU to return to the SETUP MENU. Audio Menu AUDIO MENU Audio is a useful feedback tool and it can be used to enhance a custom interface.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 2. Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown in red on the touchpanel. 3. AGC is a means of automatically controlling the gain of the amplifier in order to maintain a constant level over a limited range. It does not turn off the microphone. NOTE: If key click is enabled on a touchpanel, each press of the touchpanel results in an audible click.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Screen Settings SCREEN SETTINGS The touchpanel screen’s brightness may need to be adjusted because of ambient light conditions or personal preference. The brightness can be set via programming or altered manually from the SCREEN SETTINGS display, shown to the left. Press the Screen Settings button from the SETUP MENU to access this screen. To return to the SETUP MENU and save screen settings, select the Return button on the SCREEN SETTINGS display.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Diagnostics Menu DIAGNOSTICS MENU The Diagnostics button from the MAIN MENU should only be used under supervision from a Crestron customer service representative during telephone support. The options available from the DIAGNOSTICS MENU, shown to the left, are numeric in nature and their interpretation is beyond the scope of this manual. Hardware Hookup Make the necessary connections as called out in the following illustration.
Crestron Isys® TPS-4000 10.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel NET/VIDEO This 10-pin RJ-45 connector mates with the TPS-IMPC or TPS-IMW interface module using a supplied cable and has a dual purpose. CAUTION: The 15-foot, 10-pin RJ-45 connector cable supplied by Crestron is a custom cable. The end of the cable has a metal shield that is required to protect the equipment. Using non-Crestron cables will result in damage to the product. Other cable lengths are available from Crestron.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website (www.crestron.com). Go to http://support.crestron.com to post your own question or view questions you have submitted to Crestron’s True Blue Support. First-time users will need to establish a user account. Setup is easy thanks to Crestron’s Windows-based programming software.
10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Digital, analog and serial join numbers are a common thread between VT Pro-e and SIMPL Windows. These numbers define how the objects on a touchpanel page of a VT Pro-e project interface to the outside world, specifically the Cresnet system as defined in the SIMPL Windows program.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel PRO2 from the Control Systems folder of the Device Library and drop it in the upper pane of the System Views. The PRO2 with its associated communication ports is displayed in the System Views upper pane. PRO2 System View The System Views lower pane displays the PRO2 system tree. This tree can be expanded to display and configure the communications ports.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel “Device Settings” Window for the TPS-4000 NOTE: SIMPL Windows automatically changes Net ID values of a device added to a program if a duplicate device or a device with the same default Net ID already exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware settings details, refer to “Interface Menu” on page 10.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel For additional information, refer to the latest version of the Crestron SIMPL Windows Symbol Guide (Doc. 6120). It can be downloaded from the Downloads | Product Manuals | Software section of the Crestron website (www.crestron.com). Digital Signals A digital signal contains one bit of information and usually takes on one of two values: 1 or 0.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Analog Output Signal Descriptions OUTPUT DESCRIPTION an_act 1 through an_act 4000 Notifies control system of an action that produces an analog change (i.e. a moving slider control) (1 - 4000). Any value from 0 through 65535 Analog Input Signal Descriptions INPUT DESCRIPTION an_fb 1 through an_fb 4000 Notifies panel of analog feedback (1 - 4000).
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel interfaced with the system and thus cannot initiate any functions. The completed and compiled project is uploaded to the touchpanel and programmed into the flash PROM via the File | Upload Project command. The touchpanel uses the programmed project until another project is uploaded from the PC. Projects cannot be extracted from the touchpanel. The PC may be disconnected from the control system or panel except during reprogramming.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel NOTE: WAV files (for the TPS-4000 touchpanel) can be obtained from the Wave LC Library of the Crestron FTP site (ftp://ftp.crestron.com/Wave LC/). Since the CT/LC-1000 touchpanel accepts the same WAV file formats, only use those WAV files designated for the CT/LC-1000, TPS-2000L, TPS-3000, or TPS-4000 touchpanels. These WAV files are different than those made available for the CNXTA, Crestron CNX Telephone Audio Interface Card.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 3. There are three system-wide join numbers that the designer can define. The first, sound playing from panel, differs from the other two in that it is triggered from the panel. a. Sound Playing from Panel – The signal for this join number goes high when the WAV file plays. b. Mute Sounds – All WAV files (except the keyclick) in the project are muted when this join number goes high. c.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 5. Select a WAV file in the Sound List table and click Properties to open the “Sound Properties” window. Assign a join number either automatically with the Auto button or by scrolling down to the desired number. Select Description to enter comments about the WAV file and click OK when done. NOTE: The assigned WAV file will play once when the feedback join goes high. 6. Repeat for each WAV file.
Crestron Isys® TPS-4000 10.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel they will not be compiled correctly in SIMPL Windows. In other words, you cannot enter Chinese character interspersed with numbers. You can enter Chinese characters or numbers in separate strings. Crestron is scheduling time to fix this in the near future and the release notes for SIMPL Windows will mention it. For now, the workaround of showing a graphic that displays the string can be used, but it is not dynamic.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel To prepare the TPS-4000 for uploading or upgrading, refer to the following figure for a typical connection diagram. Typical Connection Diagram when Uploading a Touchpanel Project or Firmware Alternatively, touchpanel projects and firmware can be directly uploaded to the touchpanel from a PC without the use of a control system. To prepare the TPS-4000 for uploading or upgrading directly from a PC, refer to the following figure.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Setup | Communications Settings Command 3. Select RS-232 as the connection type. Verify that an available COM port (COM 1 is shown after this step) is selected, and that all communication parameters and necessary options from the “Port Settings” window are selected as shown after this step. Click the OK button to save the settings and close the window.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel baud rate. If communication cannot be established, refer to the “Troubleshooting Communications” section in the respective Operations Guide for the control system. Uploading a SIMPL Windows Program A control system source file has the extension .smw. A compiled SIMPL Windows file has the extension .spz for a 2-Series control system, .bin for CNX generation, and .csz for CNX generation with SIMPL+.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel “Send Program” Window 4. To verify that the program has been transferred successfully, select Diagnostics | Report Program Information or press F7. This should display a window that provides details about the current program loaded into the control system. Uploading a VT Pro-e Project The TPS-4000 touchpanel source file has the extension .vtp. A compiled VT Pro-e file has the extension .vtz.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel File Transfer | Send Touchpanel Command 3. As shown after this step, select the Net ID of the TPS-4000 touchpanel and then click OK. The “Touch Panel Transfer” window appears (refer to the subsequent graphic). “Select Network ID” Window Check Send Direct to Wired Touchpanel if connected via RS-232 directly to touchpanel.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel “Open” Window 5. Select the VT Pro-e (.vtz) file and click Open. The transfer will complete automatically. Firmware Upgrade A firmware upgrade file has the extension .csf. To take advantage of all the TPS-4000 features, it is important that the unit contains the latest firmware available. Therefore, please check the Crestron website (http://www.crestron.com/downloads/software_updates.asp) for the latest version of firmware.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel “Select Network ID” Window Check Send Direct to Wired Touchpanel if connected via RS-232 directly to touchpanel. Select CSF File 4. Operations Guide - DOC. 6268 Browse to the .csf file and click Open to begin the transfer. 10.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Problem Solving Troubleshooting The table after this paragraph provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-4000 Touchpanel Troubleshooting TROUBLE POSSIBLE CAUSE(S) Touchpanel does not function. Touchpanel is not communicating with the network. Use Viewport (via SIMPL Windows or VT Pro-e) to poll the network.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Further Inquiries If, after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team in your area. Dial one of the following numbers. • In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Appendix: Configuring the RS-232 Port for Use To configure the RS-232 port of the TPS-4000, a local PC that contains a Crestron Viewport is required. The Viewport is one of the development tools that is part of Crestron SIMPL Windows or VT Pro-e software. Obtaining Communications Refer to “Communication Settings” on page 28 for detailed instructions on connecting a PC to the touchpanel.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel 4. Enter a command that chooses one of the RS-232 communication options. Use the same spelling as shown in the last touchpanel response. 5. The TPS-4000 responds with the following: New RS232mode set. Reboot to take effect. 6. Enter the following command: reboot 7. The TPS-4000 responds with the following: Rebooting system. Please wait. 8. From the Viewport, select Remote | Remote Console | Disconnect.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
10.4 Inch Tilt Touchpanel Crestron Isys® TPS-4000 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Isys® TPS-4000 10.4 Inch Tilt Touchpanel This page is intentionally left blank. Operations Guide - DOC. 6268 10.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6268 05.04 Specifications subject to change without notice.
