Specifications

Crestron TPS-VID Video Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5869A Video Card for TPS/Tilt Panel: TPS-VID •• 3
Leading Specifications
The table below provides a summary of leading specifications for the
TPS-VID. Dimensions and weight are rounded to the nearest hundredth
unit.
Leading Specifications of the TPS-VID
SPECIFICATION DETAILS
Power Requirements 8 Watts (0.333 Amps @ 24 VDC)
SIMPL™ Windows®
Version 1.50.05 or later
1
VisionTools™ Pro-e
Version 2.2.0.0 or later
1
Isys Touchpanel Firmware
Version 1.008.0 or later
2
2-Series Control System Update File
3
Version 1.000.CUZ or later
4
CEN/CN-TVAV Update File
Version 51233V.UPZ or later
5
CNMSX-AV/Pro Update File
Version 51125X.UPZ or later
5
CNRACKX/-DP Update File
Version 51125W.UPZ or later
5
CNMS, CNRACK, CNLCOMP Operating
System
Version 3.18.09 m, l, c or later
5
ST-CP Update File
Version 40104S or later
5 & 6
Video Types NTSC or PAL
Video Formats Composite or S-Video
Video Format Detection Within 2-seconds
Dimensions & Weight Height: 0.70 in (1.78 cm)
Width: 2.10 in (5.33 cm)
Depth: 5.93 in (15.10 cm)
Weight: 1.60 oz (0.05 kg)
1 The latest software versions can be obtained from the Downloads page (SIMPLWIN,
VTPRO-E, and TOUCHPNL Libraries) of Crestron’s website (www.crestron.com). New
users are required to register in order to obtain access to the FTP site.
2 Touchpanels with later versions of firmware may include features not mentioned in this guide.
Newer versions of this guide can be obtained from the Products page (PRODUCT
MANUALS section) or Downloads page (MANUAL Library) of Crestron’s website or
contact Crestron customer service. Firmware upgrade files can be obtained from the What’s
New page (Touchpanels section) or Downloads page (TOUCHPNL Library) of Crestron’s
website.
3 Crestron 2-Series control systems consist of the AV2, AV2 with Card Cage, CP2, CP2E,
PAC2, PAC2M, PRO2, and RACK2.
4 Filenames for 2-Series control system update files have a CUZ extension and can be obtained
from the What’s New page (Control Systems Update Files section) or Downloads page
(OPSYS Library) of Crestron’s website.
5 CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for
CNX update files have a UPZ extension and ST-CP files are in one EXE or zipped UPZ file.
All can be obtained from the What’s New page (Control Systems Update Files section) or
Downloads page (OPSYS Library) of Crestron’s website. Update files are specifically
designed for certain control systems. If an update file is loaded into a control system other