Specifications

Crestron TPS-VID Video Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5869A Video Card for TPS/Tilt Panel: TPS-VID •• 9
NOTE: When connecting the video from the interface module to the
touchpanel, exceeding a video cable length 30-feet will significantly
degrade the video signal. To maintain high-quality video, DO NOT
daisy-chain cables, Crestron TPS-BLOCK devices or fabricate cables
longer than 30-feet.
TPS-VID Installation (6 of 6) - Attach 10-Position Net/Video Cable Assembly
HEADPHONES AUDIO RGB LANRS-232 NET/VIDEO 24VDC 2.0A
CRESTRON
TPS - IMC
NET
Z
AUDIO
PANEL
AUDIO
INPUT
+S
R
S
MIC
OUT
S
L
+
_ _
+
_
TO
VIDEO
NET/
+
_
Y
COMP
S
NTSC/PAL VIDEO
+ S
C
C
_
Y
COMP
GY24
10-POSITION
NET/VIDEO CABLE
ASSEMBLY
CONNECTED TO
VIDEO SOURCE
TOUCHPANEL
TPS-IMC
CONNECTED
TO CRESNET
To display video at the TPS-VID,
Cresnet power MUST be con-
nected to the TPS-IMC. If utilizing
the TPS-IMC-BV, an external power
pack may be connected to the
TPS-IMC-BV to supplement
Cresnet power or if Cresnet
power is not available.
NOTE:
14. Re-connect all cables to the appropriate touchpanel rear panel
ports.
Setup
VT Pro-e Setup
A video window object must reside on a page within the uploaded VT
Pro-e touchpanel project and the TPS-VID must be installed into the
proper expansion slot of the Isys™ tilt touchpanel in order for the TV
video to be displayed. If the card is not present, the Crestron Viewport
displays a warning message during the upload and the video window
remains blank. For details regarding video window objects, refer to the
VT Pro-e help file.