Specifications

Crestron TPS-VID Video Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5869A Video Card for TPS/Tilt Panel: TPS-VID •• 7
9. Refer to the diagram below. Install the four card mounting
screws (supplied), tighten to finger-tight then, using a Philips
screwdriver, tighten an additional 1/8-turn.
TPS-VID Installation (4 of 6) - Install TPS-VID Mounting Screws
10. Position the touchpanel base cover onto the base by tilting the
front of the cover downward under the touchpanel pivot and
lowering.
11. Hold the touchpanel base cover in place and position the
touchpanel face-down onto a padded surface to prevent
scratching of the screen.
12. Refer to the diagram on the next page. Re-install the eight base
cover screws to finger-tight then, using a Philips screwdriver,
tighten an additional 1/8-turn.