Specifications

RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA-BV
4 •• RGB Computer Interface Card with Balanced Video for TPS/Tilt Panel: TPS-XVGA-BV Operations & Installation Guide - DOC. 5920
Leading Specifications
The table below provides a summary of leading specifications for the
TPS-XVGA-BV. Dimensions and weight are rounded to the nearest
hundredth unit.
Leading Specifications of the TPS-XVGA-BV
SPECIFICATION DETAILS
Power Requirements
10 Watts (0.417 Amps @ 24 VDC)
SIMPL™ Windows®
Version 1.50.05 or later
1
VisionTools™ Pro-e
Version 2.2.0.0 or later
1
Isys Touchpanel Firmware
Version 1.008.0 or later
2
CEN/CN-TVAV Update File
Version 51233V.UPZ or later
3
CNMSX-AV/Pro Update File
Version 51125X.UPZ or later
3
CNRACKX/-DP Update File
Version 51125W.UPZ or later
3
ST-CP Update File
Version 40104S or later
3 & 4
CNMS, CNRACK, CNLCOMP Operating
System
Version 3.18.09 m, l, c or later
3
Max. Input Resolution 1600x1200
Max. Input Refresh Rate
85Hz at 1600x1200 Resolution
5
Video Sampling Rate 140MHz (Limited by Crestron)
Dimensions & Weight Height: 1.21 in (3.07 cm)
Width: 4.02 in (10.21 cm)
Depth: 5.70 in (14.48 cm)
Weight: 2.75 oz (0.08 kg)
1 The latest software versions can be obtained from the What’s New page
(SIMPL Windows and VisionTools Pro-e sections) or Downloads page
(SIMPLWIN and VTPRO-E Libraries) of Crestron’s website
(www.crestron.com). New users are required to register in order to obtain
access to the FTP site.
2 Touchpanels with later versions of firmware may include features not
mentioned in this guide. Newer versions of this guide can be obtained from the
Products page (PRODUCT MANUALS section) or Downloads page
(MANUAL Library) of Crestron’s website or contact Crestron customer
service. Firmware upgrade files can be obtained from the What’s New page
(Touchpanels section) or Downloads page (TOUCHPNL Library) of
Crestron’s website.
3 CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP.
Filenames for CNX update files have a UPZ extension and ST-CP files are in
one EXE or zipped UPZ file. All can be obtained from the What’s New page
(Control Systems Update Files section) or Downloads page (OPSYS Library)
of Crestron’s website. Update files are specifically designed for certain control
systems. If an update file is loaded into a control system other than the device