Installation guide

Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel
Video Card for TPS/Tilt Panel:
TPS-VID-1/TPS-VID-2
Introduction
Features and Functions
The TPS-VID-1 and TPS-VID-2 video cards are designed for Crestron’s
Isys™ TPS-4500, TPS-5000, and TPS-6000 tilt touchpanels. Each card
contains a video digitizer that allows video signals to be displayed on a
touchpanel. The TPS-VID-1 can display one S-video or composite video
source while the TPS-VID-2 can display one S-Video source or two
composite video sources. The video card accepts either National
Television System Committee (NTSC) or Phase Alternating Line (PAL)
signal types. Composite and S-Video formats are supported and can be
displayed in a window or full screen page in an uploaded VisionTools
™
Pro-e (VT Pro-e) touchpanel project.
Functional Summary
• Built-in Time-Based Correction for Stable Video & Graphics
• Scale video at full screen or window to any size
• Display picture-in-picture or place windows anywhere on the
screen
• Supports NTSC/PAL Formats with Auto-Detect
• Coaxial or Balanced Video Input
• Auto-Detects Composite or S-Video Format within two seconds
(TPS-VID-2 Auto-Detects format only on input 1 when input 2 is
not used.)
• Simultaneous display of two real-time composite video windows
on one touchpanel screen (TPS-VID-2 only)
• TPS touchpanels can display up to three sources on-screen
simultaneously when TPS-VID-2 and TPS-XVGA cards are
installed (two composite video, one VGA)
Operations & Installation Guide - DOC. 6059 Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 • 1