Installation guide

Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel
Video Setup Details (continued)
VIDEO
SCREEN
BUTTONS
DESCRIPTION
Saturation Use to increase or decrease image saturation.
Hue Use to shift the color balance.
Fast Motion /
Still Video
(toggle)
The Fast Motion setting eliminates motion
artifacts caused by the difference between the
first and second halves of a video field and
softens the image. The Still Video setting yields
a much sharper image, however, motion
artifacts may occur if fast moving objects are
displayed.
Soft / Sharp
(toggle)
Used to soften images that are too sharp or
sharpen video images that are too soft.
Default
Returns you to the default settings
*
.
Return Saves the settings and returns to the SETUP
MENU
* Video default is 50% for each of the video parameters (brightness, contrast,
saturation, and hue) fast motion, sharp picture, and Composite Video on
BNC connector
5. Select the Return button to save settings and return to the
SETUP MENU.
VT Pro-e Setup
A video window object must reside on a page within the uploaded
VT Pro-e touchpanel project and the TPS-VID-1 or TPS-VID-2 must be
properly installed into the touchpanel in order for video signals to be
displayed.
When using the TPS-VID-2, the video window object properties must
have the video source specified in the Input number field (“Composite 1”
for Video 1 or “Composite 2” for Video 2) of the Source tab. Refer to the
following illustration that shows selection of the video source.
Operations & Installation Guide - DOC. 6059 Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 • 15