Installation guide

Crestron TPS-VID-1 / TPS-VID-2 Video Card for TPS/Tilt Panel
TPS-VID-1/VID-2 Installation (1 of 6) – Remove Touchpanel Base
Cover Screws
TPS-6000
ZA*****
SEE MANUAL
FCC ID: EROTPS-6000
C000000
USE POWER PACK PW-2420RU
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
CLEAN PANEL WIT H SOFT CLOTH O NLY
READ INSTRUCTION MANUAL BEFORE OPERATING
NO USE R SERVICABLE PARTS UNDER THIS COVER
6. Place the touchpanel upright on the work surface.
7. Remove the touchpanel base cover by raising it upwards and
rearward. Refer to the diagram on the following page for a
detailed view.
TPS-VID-1/VID-2 Installation (2 of 6) – Remove Touchpanel Base
Cover
Operations & Installation Guide - DOC. 6059 Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 • 7