Specifications

Software Crestron Touch The PC Driver
window, a COM port other than the default COM1 can be selected, to specify the
COM port from which the PC will receive the Touch the PC V2 commands.
Setup.exe will finish with a prompt to restart the computer. The computer MUST be
restarted.
The Windows Start menu will now list UPDD as a program, and the system tray of
the Windows status bar will include icons shown below.
Pointer Device Settings & Event Scheduler Icons
After the system has been configured and programmed as outlined in the rest of this
guide, it can be calibrated (or tested). Right-click the Pointer Device Settings icon
and as shown below, select Calibrate from the Device Manager menu. Select
Device 1 | Normal and calibrate the screen by following the onscreen directions.
Select Calibrate
The COM port can be changed by selecting Adjust settings from the Device
Manager menu. As shown in the following illustration, open the Hardware tab and
choose a COM port from the drop-down list.
Hardware Tab
NOTE: For additional keyboard functionality programmed into the touchpanel,
refer to “Appendix A – Additional Keyboard Functionality” on page 20.
4 • Touch the PC Driver Programmer’s Guide – DOC. 5916B