Specifications

Software Crestron Touch The PC Driver

• 6a. If Serial is selected, proceed to step 7 below.

• 6b. If Cresnet is selected, select the serial join number (specified

during step 1 of “SIMPL Windows Programming” that begins on

page 13) to reference the assigned touchpanel serial output from

the Serial Join drop-down list.

• 6c. If TCP/IP is selected, select the serial join number (specified

during step 1 of “SIMPL Windows Programming” that begins on

page 13) to reference the assigned touchpanel serial output from

the Serial Join drop-down list. Then select the desired device ID

from the Device ID drop-down list (specified during step 3 of “VT

Pro-e Programming” that begins on page 14.)

7. In the “Project Properties” window, click OK.

8. Open (or create) a page or subpage and select Draw | RGB Window

(or from the Objects Drawing toolbar, click the Draw RGB Window

button).

9. Position the cursor on the page and drag out a box of the desired size.

10. Double-click the RGB window to display “RGB Video Properties”

window and set parameters, as with any other VT Pro-e object.

11. In the “RGB Video Properties” window, select the Design tab.

NOTE: The bigger the window, the less noticeable will be any calibration error

NOTE: Pad 2 may be used for a second computer, an alternate connection, or a

Boeckeler Pointmaker

Video Marker telestrator, a video annotation device by

Boeckeler Instruments (www.pointmaker.com)

. For further information, refer to the

latest revision of Pointmaker

Telestrator Integration Guide (Doc. 5929). This

document can be obtained from the Downloads | Product Manuals section of the

Crestron website (www.crestron.com)

. New users are required to register in order to

obtain access to the FTP site.

“RGB Video Properties” Window

NOTE: If desired, buttons with special reserved join numbers to specify additional

mouse and computer functions may be created. To create the buttons, refer to

“Appendix A – Additional Keyboard Functionality” on page 20.

• Touch the PC Driver Programmer’s Guide – DOC. 5916B