Specifications

Crestron Isys™ TPS-6000L 15 Inch Lectern Touchpanel
AUDIO INPUT Pinouts
PIN DESCRIPTION
S Shield
R+ Right Positive
R- Right Negative
L+ Left Positive
L- Left Negative
S Shield
• MIC OUT – The port mates with a three-pin connector, supplied, and
produces line level differential output. Description of the pinouts is
shown in the table after this paragraph.
MICROPHONE Pinouts
PIN DESCRIPTION
M+ Positive
M- Negative
S Shield
• RS-232 – The port mates with a serial port of a PC; connecting cable is
not supplied. Use this port for direct connection to the PC to load files
to a touchpanel without a network connection. In the event that
modular cables or an RJ11 to DB9F adapter is not available, the table
and diagram below provides information so that the cable can be
fabricated on site. Refer to "Appendix B: RS-232 Protocol" on page 40
for protocol details.
RS-232 Pinouts
PIN DESCRIPTION
1CTS
2GND
3RXD
4TXD
5RTS
6 No Connect (N/C)
PC to TPS-6000L Cable Specifications
The optional connectors are:
• RGB INPUT – These five connectors are made available with the
purchase and installation of the TPS-XVGAL, a scan converter card.
Consult the latest revision of the TPS-XVGAL Operations &
Installation Guide (Doc. 5828) for details.
Operations Guide - DOC. 5825 15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L • 3