Specifications

15 Inch Lectern Touchpanel Crestron Isys™ TPS-6000L
audio messages can provide that custom interface with a touchpanel, assuming this
feature is enabled. To enable this feature, verify that the WAV On button is active
(red text). An active WAV Off button disables the feature. Refer to "Appendix A:
WAV File Audio Messages" on page 28 for WAV files.
Line level audio is possible only when enabled and the proper external connections
are made. Refer to "I/O Connectors" on page 2 for information about the AUDIO
INPUT port. To enable this feature, verify that the Line On button is active (red
text). An active Line Off button disables the feature.
Confirmation of a button press on a touchpanel is acknowledged by an audible click
assuming this feature is enabled. To enable this feature, verify that the Key Click On
button is active (red text). An active Key Click Off button disables the feature.
NOTE: If key click is enabled on a touchpanel, each press of the touchpanel results
in an audible click. It may be desirable to conceal the key click sound for certain
buttons (e.g., if the button triggers playing of a WAV file). Using VT Pro-e, the
panel designer has the option to suppress the key click on a button-by-button basis
from the "Button Properties" dialog.
It is possible to enable/disable all audio types (WAV, line, and key click) with the
press of a single button. The All Audio On and All Audio Off buttons allow for
global muting. Select the All Audio On button to enable audio; select the All Audio
Off button to disable audio.
The built-in microphone AGC mode can be controlled with two buttons on the Audio
Menu: Mic Audio AGC On and Mic Audio AGC Off.
Select the Default Settings button to restore all Audio Menu buttons and settings to
a factory-adjusted preset. Select the Return button, located at the lower right corner
of the Audio Menu, after audio parameters have been set.
RGB Menu
NOTE: The RGB button is displayed on the Setup Menu only if the TPS-XVGAL
is properly installed. Selection of the RGB button opens the RGB Menu from which
the user can adjust RGB settings.
The TPS-6000L can display a computer-generated video format. The type of format
must be selected carefully or the video may appear unstable or noisy. Selecting the
RGB button, located to the right on the top row of the Setup Menu, displays the
RGB Menu, shown after this paragraph.
RGB Menu
16 • 15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L Operations Guide - DOC. 5825