Installation guide

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel
3. As shown on the next page, select Tools | Viewport to open the
Crestron Viewport window.
Accessing the Viewport
4. Refer to the documentation supplied with the host control
system and verify communication.
5. As shown below, select Remote | Remote Console | Connect
from the menu.
Viewport Remote Console Connect
6. From the window, select the appropriate NET ID of the
touchpanel.
7. Observe the Viewport connect to the touchpanel.
Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL • 15