Installation guide

Ethernet Card for TPS/Lectern Panel Crestron TPS-ENETL
Remove PCB Blank Plate
5. As shown on below, align the pins on the touchpanel interface
connector of the TPS-ENETL with the touchpanel motherboard
connector.
Install TPS-ENETL
6. DO NOT force pins into connector. Press TPS-ENETL until
pins are fully seated. Make sure that the mounted screws align
with mounting posts of the motherboard.
8 • Ethernet Card for TPS/Lectern Panel: TPS-ENETL Operations & Installation Guide - DOC. 6013