Specifications
Crestron TPS-6 Isys™ 5.7” Tilt Touchpanel
Programming with SIMPL Windows
NOTE: While SIMPL Windows can be used to program the TPS-6, it is
recommended to use SystemBuilder for configuring a system.
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
1. The TPS-6 must first be incorporated into the system.
a. To incorporate the TPS-6 (Cresnet) into the system, drag the
TPS-6 from the Touchpanels | Touchpanels (Cresnet) folder of the
Device Library and drop it in the System Views.
Locating the TPS-6 (Cresnet) in the Device Library
b. To incorporate the TPS-6 (Ethernet) into the system, drag the
TPS-6 from the Touchpanels | Touchpanels (Ethernet) folder of the
Device Library and drop it in the System Views.
Locating the TPS-6 (Ethernet) in the Device Library
2. The system tree of the control system displays the device in the appropriate
slot(s) with a default Net ID, or IP ID as shown in the following illustration.
Operations Guide – DOC. 6945A Isys™ 5.7” Tilt Touchpanel: TPS-6 • 31