Specifications

Crestron TPS-6X Isys
®
5.7” Wireless Touchpanel
Hardware Connections for the TPS-6X-IMCW (Rear)
POWER:
FROM POWER PACK
(12 VDC, 1.5A)
VIDEO IN:
BALANCE OR
UNBALANCED
SOURCE
NET:
TO CONTROL
SYSTEM OR ANY
OTHER CRESNET
DEVICE
LAN:
10/100BASE-T
TO LAN
NOTE: Ensure the TPS-6X-IMCW is properly grounded.
NOTE: The TPS-6X-IMCW can be powered via the 12 VDC jack on either the
front or the back of the unit if the NET port is not being used to power the module.
Recommended Cleaning
Touchscreen
Keep the surface of the touchscreen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid getting moisture
beneath the bezels.
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
Enclosure
The soft felt bag the TPS-6X came shipped in can be used to clean the bezel and the
rest of the touchpanel enclosure.
Operations Guide – DOC. 6575B Isys
®
5.7” Wireless Touchpanel: TPS-6X • 35