Specifications

Crestron TPS-6X Isys
®
5.7” Wireless Touchpanel
TPS-6X Specifications (Continued)
SPECIFICATION DETAILS
Weight 1.59 lbs (720 g)
Available Models (Domestic)
TPS-6X
Isys 5.7” Wireless Touchpanel, High Gloss
Black
TPS-6X-B-T Isys 5.7” Wireless Touchpanel, Matte Black
TPs-6X-W-S
Isys 5.7” Wireless Touchpanel, High Gloss
White
Available Models (International)
TPSI-6X
Isys 5.7” Wireless Touchpanel, High Gloss
Black
TPSI-6X-B-T Isys 5.7” Wireless Touchpanel, Matte Black
TPSI-6X-W-S
Isys 5.7” Wireless Touchpanel, High Gloss
White
Included Accessories
PW(I)-1215 12 Volt Power Pack
TPS-6X-BTP Internal Battery Pack
TPS(I)-6X-DS Desktop Docking Station (specify color)
TPS-6X-FP
Button Bezel with Default Engraving
(specify color)
TPS-6X-FP-NB No Button Bezel (specify color)
TPS-6X-IMCW Interface Module
Available Accessories
C2N-IRGW-1G Wall Mount IR Gateway
C2N-IRGW-F Flush Mount IR Gateway
CEN(I)-HPRFGW High Powered RF Gateway
CNXRMIRD IR Receiver
SMK-6X Swivel Mount Kit
TPS(I)-6X-DS-C
Desktop Docking Station, Charging only
(specify color)
TPS-6X-FP
Button Bezel w/Custom Engraving
(specify color)
1. When IR is enabled, the RF transceiver is disabled and wired communication is restricted to console
functions only (i.e. programming and configuration).
2. Requires a wired connection via TPS(I)-6X-DS Docking Station (included).
3. When the battery switch on the rear of the unit has been in the OFF position, as when the unit is
shipped or stored, the TPS-6X should be placed on its docking station/charger for a minimum of four
hours before using. Refer to “Battery Switch” on page 13 for details.
4. May be powered by 12 Volts DC or Cresnet network power but not both.
5. The latest software versions can be obtained from the Crestron
®
website. Refer to the NOTE
following these footnotes.
6. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
7. When loading VisionTools
®
Pro-e (VT Pro-e) files or firmware through the RS-232 port of the control
system, be sure that the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Crestron
Toolbox™ may post the “Transfer Failed” message.
8. Text engraving on the TPS-6X-W-S white model is not backlit.
NOTE: Crestron
®
software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
Operations Guide – DOC. 6575B Isys
®
5.7” Wireless Touchpanel: TPS-6X • 7