Specifications

Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5944 RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA •• 7
6. Refer to the diagram below. Using a #1 Phillips screwdriver,
loosen and remove the eight screws that secure the touchpanel
base cover.
Installation Diagram 1 of 7 - Remove Touchpanel Base Cover Screws
TPS-6000
ZA*****
SEE MANUAL
FCC ID: EROTPS-6000
C000000
USE POWER PACK PW-2420RU
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
CLEAN PANEL WITH SOFT CLOTH ONLY
READ INSTRUCTION MANUAL BEFORE OPERATING
NO USER SERVICABLE PARTS UNDER THIS COVER
7. Place the touchpanel upright on the work surface.
8. As shown below, remove the touchpanel base cover by raising
it upwards and rearward.
Installation Diagram 2 of 7 - Remove Touchpanel Base Cover