Specifications

Crestron Isys

TPS-3100L 6.4” Lectern/Wall Mounted Touchpanel

Hardware Connections for the TPS-3100L (Back of the Unit is Shown)

RS-232:

TO PC OR ANY

RS-232 DEVICE

MICROPHONE OUTPUT:

PROVIDES LINE-LEVEL

BALANCED OUTPUT

CRESNET:

TO CONTROL SYSTEM AND

OTHER CRESNET DEVICES

BALANCED VIDEO INPUTS

USING TWISTED PAIR CABLE:

COMPOSITE OR S-VIDEO

AUDIO INPUT:

LINE-LEVEL, BALANCED &

UNBALANCED AUDIO SOURCES

UNBALANCED VIDEO INPUTS

USING COAX CABLE:

COMPOSITE OR S-VIDEO

RS-232

This 6-position RJ-11 connector mates with a serial port of a PC. The connecting

cable is not supplied. Prior to installation, use this port for direct connection between

the touchpanel and a PC to load files to a touchpanel without a network connection.

In the event that modular cables or an RJ-11 to DB9F adapter is not available, the

table below and diagram on the next page provide information so that the cable can

be fabricated on site. Refer to “RS-232 Menu” on page 14 for proper RS-232 port

configuration settings.

RS-232 Pinouts

PIN # DESCRIPTION

1 CTS

2 GND

3 RXD

4 TXD

5 RTS

6 N/C (Not connected)

Front

Top

Operations Guide – DOC. 6291 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L • 15