Specifications

Crestron Isys
®
TPS-3100L 6.4” Lectern/Wall Mounted Touchpanel
Audio Setup Details
AUDIO
MENU
BUTTON
1
AUDIO
SETUP
SCREEN
DESCRIPTION
2
Master 88%
Master
Volume
The volume of all audio types (WAV, line, and key
click) is affected by the Master Volume control. If
the Master Volume control is set to 100%, the
volume for any type of audio is at maximum. If the
Master Volume is set to 0%, the value of all audio
types is overridden and the touchpanel is silent. If
Master Volume is a percentage (say 50%), then all
audio types can only achieve half their value.
WAV 88%
(On)
WAV
Enable WAV files with the WAV On button. WAV
Off disables this feature. Adjust the volume with
the UP and DOWN buttons. Select the Play WAV
File to sample and adjust the volume as a pre-
loaded WAV file plays.
Line 88%
(On)
Line
Enable line level audio with the Line On button.
Line Off disables this feature. Adjust the volume
with the UP and DOWN buttons.
All Audio
(On)
All Audio
Control
All types of audio may be disabled with a single
button press. All Audio Off activates global
muting. All Audio On enables all audio.
Key Click
Enabled
(Vol. 83%)
Key Click
Click On enables the key click sound, Click Off
disables the key click. Adjust the volume with the
UP and DOWN buttons.
Mic AGC On AGC
3
The built-in microphone AGC (Automatic Gain
Control) is enabled by the Mic Audio AGC On
button and disabled with the Mic Audio AGC Off
button.
Treble &
Bass (49%)
Treble &
Bass
Two UP and DOWN buttons allow independent
treble and bass adjustment.
1. The button text shown demonstrates the default audio setting for a given button. The items in
parenthesis are also default values, but are seen in subsequent screens.
2. Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown
in red on the touchpanel.
3. AGC is a means of automatically controlling the gain of the amplifier in order to maintain a constant
level over a limited range. It does not turn off the microphone.
NOTE: If key click is enabled on a touchpanel, each press of the touchpanel results
in an audible click. It may be desirable to conceal the key click sound for certain
buttons (e.g., if the button triggers playing of a WAV file). Using Crestron
VisionTools
®
Pro-e (VT Pro-e), the panel designer has the option to suppress the key
click on a button-by-button basis from the “Button Properties” window. A button
must have a page flip or a join number other than “0” assigned for it to click.
Operations Guide – DOC. 6291 6.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-3100L • 11