Specifications

Crestron Isys
®
TPS-3000 6.4 Inch Tilt Touchpanel
“Send Program” Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information. This should display a
window that provides details about the current program loaded into the
control system.
Uploading a VT Pro-e Project
The VT Pro-e file can be uploaded to the touchpanel using VT Pro-e or via the
Crestron Viewport. The TPS-3000 touchpanel source file has the extension .vtp. A
compiled VT Pro-e file has the extension .vtz.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the “Open” window.
3. Navigate to the VT Pro-e file (.vtp), and click Open.
3. Select File | Upload Project.
Upload via Crestron Viewport
1. Verify that the procedure for “Communications Settings” that begins on
page 32 has been performed.
2. As shown after this step, select File Transfer | Send Touchpanel
(alternatively, press Alt+T) from the Viewport menu.
Operations Guide – DOC. 6076A 6.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-3000 • 35