Specifications

Crestron Isys
®
TPS-3000 6.4 Inch Tilt Touchpanel
Audio Menu
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
obtain the AUDIO MENU, shown below, press the Audio button from the SETUP
MENU. The AUDIO MENU offers a series of buttons, which opens additional
screens and each is detailed in a table after this paragraph. Two of the buttons on the
AUDIO MENU perform a function directly. The Restore Default Settings button
returns all audio parameters to their default settings when the button is selected.
After audio parameters have been set, select the Return button to return to the
SETUP MENU.
AUDIO MENU
Audio Setup Details
AUDIO
MENU
BUTTON
1
AUDIO
SETUP
SCREEN
DESCRIPTION
2
Master 88% Master Volume
The volume of all audio types (WAV, line, and key click) is affected by the
Master Volume control. If the Master Volume control is set to 100%, the volume
for any type of audio is at maximum. If the Master Volume is set to 0%, the
value of all audio types is overridden and the touchpanel is silent. If Master
Volume is a percentage (say 50%), then all audio types can only achieve half
their value.
WAV 88%
(On)
WAV
Enable WAV files with the WAV On button. WAV Off disables this feature.
Adjust the volume with the UP and DOWN buttons. Select the Play WAV File
to sample and adjust the volume as a pre-loaded WAV file plays.
Line 88% (On) Line
Enable line level audio with the Line On button. Line Off disables this feature.
Adjust the volume with the UP and DOWN buttons.
All Audio (On)
All Audio
Control
All types of audio may be disabled with a single button press. All Audio Off
activates global muting. All Audio On enables all audio.
Key Click
Enabled
(Vol. 83%)
Key Click
Click On enables the key click sound, Click Off disables the key click. Adjust
the volume with the UP and DOWN buttons.
Mic AGC On AGC
3
The built-in microphone AGC (Automatic Gain Control) is enabled by the Mic
Audio AGC On button and disabled with the Mic Audio AGC Off button.
Treble & Bass
(49%)
Treble & Bass
Two UP and DOWN buttons allow independent treble and bass adjustment.
1. The button text shown demonstrates the default audio setting for a given button. The items in
parenthesis are also default values, but are seen in subsequent screens.
2. Each screen has its own Return button to revert to the AUDIO MENU. Selected buttons are shown
in red on the touchpanel.
3. AGC is a means of automatically controlling the gain of the amplifier in order to maintain a constant
level over a limited range.
Operations Guide – DOC. 6076A 6.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-3000 • 13