Specifications

6.4 Inch Tilt Touchpanel Crestron Isys

TPS-3000

Setup Menu

To obtain the SETUP MENU, shown below, press the Setup button from the MAIN

MENU. The SETUP MENU offers a series of buttons, which opens additional

menus and displays, which are detailed in subsequent paragraphs. After setup

parameters have been set, select the Return button to return to the MAIN MENU.

SETUP MENU

NOTE: For convenience, the current

CRESNET ID setting is displayed in

the lower left corner.

NOTE: All touchpanel settings are

automatically saved in non-volatile

memory.

Interface Menu

The touchpanel communicates with a control system to activate commands or to

display feedback from components within the system. The communication interface

must be correctly specified or communication will not occur. To set communication

parameters select the Interface

utton located on the SETUP MENU and display the

INTERFACE MENU, shown below.

The Cresnet network identity number (CRESNET ID) is displayed on the

INTERFACE MENU. CRESNET ID is the two-digit hexadecimal number. The

hexadecimal number can range from 03 to FE and must correspond to the Net ID set

in the SIMPL Windows program of the Cresnet system. Matching IDs between

touchpanel and SIMPL Windows program is required if data is to be successfully

transferred. Net ID for the TPS-3000 is factory set to 03 and no two devices in the

same system can have the same ID.

INTERFACE MENU

Two buttons adjacent to the hexadecimal display, UP and DOWN, increase and

decrease the CRESNET ID by one, respectively.

Select the Return button located on the INTERFACE MENU to return to the

SETUP MENU.

12 • 6.4 Inch Tilt Touchpanel: Crestron Isys

TPS-3000 Operations Guide – DOC. 6076A