Specifications

Crestron Quick Guide to Touchpanel Connections
Doc. 4903B
34
NET
This 4-position mini-terminal block connector provides Cresnet network connection
from the touchpanel as well as power to the touchpanel.
 Pins 24 and G provide 24 VDC and ground.
 Pins Y and Z provide communications (data)
NET
24 Y Z G
VID IN (unbalanced)
Unbalanced composite video input
Input impedance: 75 Ω nominal
Input level: 1 V
p-p
nominal, 1.5 V
p-p
maximum
Maximum DC offset: ±2 Volts
Connects to any conventional coax video source (S=shield)
VID IN (balanced)
Balanced composite video input
Input impedance: 100 Ω nominal
Input level: 1 V
p-p
nominal, 1.5 V
p-p
maximum
Maximum DC offset: ±2 Volts
Connects to any Crestron CH CAT5 Video Out port via CresCAT
®
cable (S=shield)
LAN (Ethernet)
One 8-wire RJ-45 connector provides an Ethernet 10baseT/100baseTX,
full duplex, IEEE 802.3U compliant network connection.
LAN Connector
PIN SIGNALS PIN SIGNALS
1 TX + 5 N/C
2 TX - 6 RC -
3 RC + 7 N/C
4 N/C 8 N/C