Specifications

Crestron Quick Guide to Touchpanel Connections
Doc. 4903B 27
AUDIO (To Panel)
This 8-pin RJ-45 mates with the TPS-3000, TPS-5000, or TPS-6000 touchpanel.
The 8-pin audio cable assembly is supplied. Even though the 10-pin net/video
cable may fit into the port, do not use it. This port provides audio input to the
touchpanel and microphone output from the touchpanel. A description of the
pinouts is shown in the following table. To determine the location of pin 1, hold
the cable so that the end of the 8-pin RJ-45 connector is facing away from you,
with the clip side down and the copper side up.
The copper connector on the far left is pin 1.
AUDIO (To Panel)
PIN DESIGNATION DESCRIPTION
1 L+ Left Input (Positive)
2 L - Left Input (Negative)
3 GND/Shield Audio Input Ground/Shield
4 R+ Right Input (Positive)
5 R - Right Input (Negative)
6 GND/Shield Mic Output Ground/Shield
7 M+ Mic Output (Positive)
8 M - Mic Output (Negative)
AUDIO INPUT
The port mates with a six-pin connector (supplied) and provides balanced and/or
unbalanced audio input.
AUDIO INPUT
PIN DESCRIPTION
S Shield
R + Right Positive
R - Right Negative
L + Left Positive
L - Left Negative
S Shield
+ - G + -
+
+
Balanced
Input
Shield
1 2
Source 1
Source 2
Jumpers
+ - G + -
+
+
Unbalanced
Input
1 2
Source 1
Source 2
Shield
Shield