Specifications

Tilt Touchpanels Crestron Isys

TPS-12/15/17

5. Once the cable connections are made, open Crestron Toolbox and click

Tools | Manage Address book to display the “Address Book” window.

6. Select the touchpanel from the address book or click Add Entry and type a

new name for the new device, such as TPS.

7. Click TCP as the connection type. Enter the IP address or hostname of the

touchpanel and click OK.

“Address Book” Window – TCP/IP Setup

8. Click Tools | System Info to display the “System Info” window. From the

pull-down menu, select the entry created in step 7.

If the touchpanel is to communicate with a control system over TCP/IP, an IP table

must be created on the touchpanel to identify the control system(s) it will

communicate with over TCP/IP.

Use the following instructions to create the IP table.

1. Select Functions | IP Table Setup from the Toolbox menu bar.

“IP Table” Window

¥ Tilt Touchpanels: TPS-12/15/17 Operations Guide – DOC. 6375