Specifications

Crestron Isys
®
TPS-12/15/17 Tilt Touchpanels
Certified Wire (CresCAT, CresCAT-D, or CresCAT-Q). If the supplied cable is used
for "QM" connections, signal degradation and reduced image quality may result.
NOTE: Crestron recommends an independent power supply for the touchpanel.
Refer to the following diagram for access to the connectors and cable routing.
Access to I/O Panel and Cable Routing
The TPS-12/15/17 touchpanels have rubber pads on the underside of its base so that
it can rest on a horizontal surface. Make the required connections as shown and
described in the following sections. Refer to the following illustration for proper
connections; apply power last.
Operations Guide – DOC. 6375 Tilt Touchpanels: TPS-12/15/17 ¥
25