Specifications

Tilt Touchpanels Crestron Isys

TPS-12/15/17

Setup Menu

To obtain the SETUP MENU, press the Setup button from the MAIN MENU. The

SETUP MENU offers a series of buttons, which open additional menus and displays,

and are detailed in subsequent paragraphs. The SETUP MENU also provides the

screen brightness control, key backlight control, and the standby timeout setting.

After setup parameters have been selected, select the Return button to return to the

MAIN MENU.

NOTE: For convenience, the current CRESNET ID setting is displayed in the upper

left corner.

NOTE: All touchpanel settings are automatically saved in non-volatile memory.

SETUP MENU

Interface Menu

The touchpanel communicates with a control system to activate commands or to

display feedback from components within the system. The communication interface

must be correctly specified or communication will not occur. To set communication

parameters select the Interface button located on the SETUP MENU and display the

INTERFACE MENU, as shown on the next page.

The Cresnet network identity number (CRESNET ID also known as the Net ID) is

displayed on the INTERFACE MENU. Net ID is the two-digit hexadecimal number.

The hexadecimal number can range from 03 to FE and must correspond to the Net

ID set in the SIMPL Windows program of the Cresnet system. Matching IDs

between touchpanel and SIMPL Windows program is required if data is to be

successfully transferred. Net ID for the TPS-12/15/17 is factory set to 03. No two

devices in the same system can have the same Net ID.

¥ Tilt Touchpanels: TPS-12/15/17 Operations Guide – DOC. 6375