Installation guide

4.3” Designer Touch Screen Crestron TPMC-4SMD
Mounting in a European Electrical Box
To mount the TPMC-4SMD into a European electrical box, use the following
procedure:
1. Insert a small slot head screwdriver into the hole shown in the illustration at
the top of page 21 and gently separate the back of the TPMC-4SMD.
2. Use the two included #4B x 3/4” screws (2019088) to attach the back panel
to the electrical box, as shown in the following illustration.
NOTE: For European electrical boxes, use the top and bottom screw holes for
attachment to the electrical box.
Mounting the TPMC-4SMD into a European Electrical Box
Screws
(2)
#
4B x
3/4” (2019088)
3. Carefully position the front of the TPMC-4SMD over the back panel and
gently snap it into place, as shown in the illustration at the bottom of page
22.
4. Use either the two included #04-40 x 1/4” Phillips screws (2007152 or
2007160) or the two included #04-40 x 1/4” security type Torx screws
(2025311 or 2025312) along with the included Torx screwdriver bit
(2025915) to secure the TPMC-4SMD, as shown in the illustration on page
23.
NOTE: Parts 2007152 and 2025311 come with black models.
Parts 2007160 and 2025312 come with black models.
26 • 4.3” Designer Touch Screen: TPMC-4SMD Operations & Installation Guide – DOC. 7027E