Installation guide

4.3” Designer Touch Screen Crestron TPMC-4SMD
Specifications
Specifications for the TPMC-4SMD are listed in the following table.
TPMC-4SMD Specifications
SPECIFICATION DETAILS
Touch Screen Display
Display Type TFT active matrix color LCD
Size 4.3 inch (109 mm) diagonal
Aspect Ratio 16:9 WVGA
Resolution 800 x 480 pixels
Brightness 270 nits
Contrast 300:1
Color Depth 16-bit, 64k colors
Illumination Backlit LED
Viewing Angle ±80º horizontal, ±80º vertical
Touch Screen Resistive membrane
Proximity Sensor
1
Type Active infrared beam and receiver
Range 3-4 feet (0.9-1.2 meters)
Memory
SDRAM 256 MB
Flash 2 GB
Maximum Project Size 60 MB
Graphics Engine Supports Smart Graphics or “traditional”
GUI projects
Communications
Ethernet 10/100 Mbps, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, DHCP, IEEE 802.3af and 802.3at
compliant
Video
Streaming Formats H.264 (MPEG-4 part 10 AVC), MJPEG
Audio
Features Built-in microphone and speaker, Crestron
IP Intercom
Amplification Mono, 0.5 watts
Audio Feedback Formats MP3 using Smart Graphics,
WAV using “traditional” graphics
Power Requirements
Power over Ethernet IEEE 802.3af (802.3at Type 1) Class 3 PoE
powered device
Default IP ID
2
03
Environmental
Temperature 32º to 104º F (0º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 14 Btu/h
(Continued on following page)
6 • 4.3” Designer Touch Screen: TPMC-4SMD Operations & Installation Guide – DOC. 7027E